My HDMI 1.3 cable I use to handle my PS3 Full HD 1080p for 3DTV?
The new 3D technology is coming at us fast and furious. So it is not surprising that it takes a lot of confusion and uncertainty, especially when it comes to older hardware process and its 3D capabilities. Many believe that if you like full 1080p 3D video want the new HDMI 1.4 cable is required. And the HDMI 1.3 is only a screen resolution of 1080i for 3D.
If so, the older Blu-ray is like the PlayStation 3, which isbe 3D-capable in September 2010 and has an HDMI 1.3 output, not be sufficient to produce images of 1080p when playing 3D Blu-ray Disc from Sony PS3 is now the only old Blu-ray, 3D Blu-ray. All other 3D Blu-ray and 2010 models are equipped with the necessary hardware and codecs that are already on board.
The truth is that the HDMI 1.3 can handle 3D output. As long as the HDMI cable used is a "high speed" or ratherBlu-ray 3D Full HD 1080p output resolution. Manage two important components of a source device to output 3D are codecs and metadata. Sony also needs to update the firmware on their advanced 3D. Measured on the right upgrades, such as support for internal decoding of DTS-HD Master Audio, Sony should have no trouble completing this task.
The codec used to store 3D Multiview Video Coding, or MVC. The result is a 1080p frame for each eye and with only 50Percentage of disk space than 2D. The PS3 has been created before the MVC codec, so that Sony MVC without implementing the hardware. Also required by the PlayStation 3 is the ability to produce and maintain, it happens for 3D visualization, the correct meta-data in the communication between all HDMI-enabled devices.
This communication takes place via the Extended Display Identification Data or EDID done. Transmits information from a video display to a source via e-DDCLines to describe its capabilities. A 3DTV uses the EDID to see if 3D-capable, and if the PlayStation 3 works with your TV. Basically, the PS3 should be able to understand and respond to these new value EDID sent from 3DTV.
After the firmware from Sony is available for you to have your PlayStation 3 made with the new update of 3D technology, you should have no problems with the use of an HDMI 1.3. According to most experts, should not an HDMI cable is a major concern for consumersCompared to 3D. Are mainly due to the fact, HDMI cable and hardware version numbers with no (1.3,1.4) traded more. When purchasing an HDMI cable, you should come upon one of the following: HDMI standard, HDMI high-speed Ethernet standard with HDMI, HDMI high-speed Ethernet and HDMI Standard Automotive.
Instead of deciding which version number you need HDMI, you should be your focus on what its function, the necessary support. Whether it's Deep Color, Audio Return Channel, or3-D. High-speed HDMI cable can transmit the signal from the PS3 a 3DTV. The search for a high-speed HDMI cable should not be a problem because most HDMI cables are manufactured and sold in the last three years at high speed HDMI cables were.
*** One thing to keep in mind that you will not be able to make a Blu-ray 3D signal through a non-3D audio / video transfer. Why did not these old HDMI 1.3 A / V receiver via HDMI EDID language for 3D visualizationCompetence, they are not able to transfer the information to be displayed on the source device (3D Blu-ray). A good workaround for this problem would be to buy Blu-ray with two HDMI outputs, such as Panasonic DMP-BDT350 or Samsung BD-C7900. ***
No comments:
Post a Comment